To ensure your tanning bed lasts as long as possible, consistent care and maintenance are essential. While durable models are a good starting point, proper upkeep significantly extends their lifespan.
Following each tanning session, a two-step process of inspection and cleaning is crucial. First, carefully examine the click strip to confirm it’s securely attached. Next, inspect the facial glass (if present) for any cracks, scratches, or blemishes. Clean all key areas, including the bench and canopy acrylics, using only approved cleaning solutions. Avoid alcohol or bleach, as these can cause damage. Use a soft, non-abrasive cloth and remember to clean the tanning bed pillow.
When tanning, always use tanning lotions specifically designed for indoor tanning beds. Outdoor or oil-based lotions can harm the acrylic surfaces. Finally, for hygiene and safety, always clean and sanitize the goggles after each use.
Even with infrequent use, a consistent maintenance routine is vital. Acrylics should be checked regularly for cracks, wear, or hazing. Clean the pillow, bench, and canopy acrylics after each use. Goggles and the bed’s exterior also require daily cleaning and sanitization using approved cleaning solutions and supplies.
On a weekly basis, augment the daily cleaning with more in-depth maintenance. Dust the lamps without touching them directly with your bare hands. Remove and clean the inside of the bench and canopy acrylic sheets. Wipe down and vacuum the fans, vents, and vent hoses. Check and adjust the shock tension as needed. Ensure all set bolts are tight and inspect the power cord and bench-to-canopy connectors for wear and tear and proper fit.
Monthly maintenance should include a thorough inspection of the bench and canopy acrylics. Clean the reflectors using the appropriate cleaning solution. Inspect vent hoses for optimal ventilation, making necessary adjustments as needed, and ensure the bed is positioned at least six inches away from walls or obstructions for sufficient airflow. Finally, verify that the voltage supplied to the bed matches the manufacturer’s specifications. When replacing lamps, select replacements that meet the recommended frequency guidelines.
By diligently following these maintenance steps, you can significantly extend the life of your tanning bed, ensuring optimal performance and minimizing maintenance costs.